You are not logged in.
Where?
Naples Fl. but I travel to TN all the time so I can deliver in the south east
GReat shape with mud tires and stock tires, front and rear bumper, roof, winch, 4 point harness low miles. $9000
yea if you dont grease them they wear out and yes it sucks to replace you need to take the front diff off to get it out and the skid plale not that hard but a pain well you dont take the front diff out just take the bolts that hold it in and take them out and you can move the diff to the side and move the shaft forward to remove it do you ahve a manuel ?
No manual. Guess I'll have to get one or just dive in
It appears my universal joint as well as the yoke on the shaft are wearing out on the shaft from the transfer case to the front diff. Has anyone replaced theirs and how hard is it?
Nobody have this wear out? I have <350 miles and its shot.
It appears my universal joint as well as the yoke on the shaft are wearing out on the shaft from the transfer case to the front diff. Has anyone replaced theirs and how hard is it?
Ruesch is a manufacture and they seem to have a lot of power but i did not like the fit and finish of the one i saw. Not sure why it is posted on a Polaris thread though :?: .
I am trying to gain a little incite to the Ruesch machines and the company. In searching the forums most the posts are old so of little value as it seems Ruesch has made lots of improvements. I am currently considering becoming a dealer so any info is welcome. I posted in Polaris forum because I happen to have a RZR and there is no Ruesch forum to post in.
Anyone have any firsthand knowledge of the Ruesch SXS's?
We're taking a vacation in Pidgin Forge on Friday. Any ideas of place to ride near there?
I am looking to buy some Interco Swamp Lite 27x9.00-14 & 27x11.00-14 tires mounted on ITP SS212 Black ($693.00). Not sure what back spacing to get. Do you have a clue?
I mounted mud lites and used a 2" spacer in the rear none on front. A 1.5" might work but close.
let me know if you find any thing out on this subject. I am wanting to buy some 27 inch ITP mud lites. I am not sure if they are going to rub. I know you can fit 26 inch tires under a stock RZR.
Here is the answer. I went with mudlite XTR in 27X11 on the rear and 27X9 on the front. The rear needed 2" spacers although a 1.5" might do the trick. No spacer on the front. If you try to install a 2" on the front it will cause the tire to hit at hard lock.
Just picked up a RZR yesterday. Never even road in one before. Now here I sit with a new toy in the garage and I don't know where you can ride these things. Any ideas for places around Naples Florida?
I live in Naples also. There is not many places to ride. It also depends on what kind of riding you are looking to do. Trail riding Big Cypress is probley your best bet. For mud we have been riding a lot in places you have to "pay to play", L-Cross and/or Redneck Yatch Club. For sand / "so called dunes" try the place called the croom. You can also try this forum http://www.atvflorida.com/index.php for more info about florida. I also posted on that forum with pics of our last trip to Redneck Yatch Club. http://www.atvflorida.com/forum/index.p … 495.0.html
I saw Croom on the web. Seems they don't allow side by sides. Width restrictions. A friend told me about L cross also. I'll look up redneck yacht club, Thanks.
I am looking to buy some Interco Swamp Lite 27x9.00-14 & 27x11.00-14 tires mounted on ITP SS212 Black ($693.00). Not sure what back spacing to get. Do you have a clue?
Sorry, no clue. I am new to this ATV stuff. THe mudlite XTR that rubbed was a 27X11-12. They said a spacer would make it work. Of course they didn't say how much spacer. Also I was just looking at mine and have a concern on the 27" tire. It might hit the exhaust with springs compressed. I think I am going to get the mug gear in 26" and I have 2" spacers coming.
let me know if you find any thing out on this subject. I am wanting to buy some 27 inch ITP mud lites. I am not sure if they are going to rub. I know you can fit 26 inch tires under a stock RZR.
27" mudlite radials will rub. I tried, and the rear hits on the right side at the motor mount. Thats with stock wheels. If you have aftermarket with more of an offset or useing spacers then it should fit. I just bought 2" spacers for mine and am looking to decide between mud lite radials or mug gear tires.
the muzzy is supposed to be the best out for the rzr. you can do other things first before the exahust. you can pull the washer out and get more top end. i can get a dunners kit were you can run your stock belt.
What washer do you pull for more top end? Not that it doesn't already scare me.
I have a new RZR and need to go to a larger mud tire cause rainy season is coming. Anyone know the largest size I can get on it?