You are not logged in.
what is the best way to get about 3" of more clearance on my 2012 RZR.I have 26" tires on which height is 24" would it be a 2-3" lift kit or bigger tires.Bigger tires i am no fan of unless best way,if lift kit what doe,s this involve? THANKS
Offline
You can't go much bigger on tires without a lift since they will rub the fender wells.
2" lift. I wouldn't go 3" since you're starting to put a lot of stress on the CV joints over 2" of lift. And most 2" lifts are as easy as unbolting your shocks, bolting a bracket to the shock mount and bolting your shock to that bracket. Simple hand tools and a floor jack.
And Bigger tires. What 26" tires do you have that are only 24" tall.
If you got a 2" lift a 2" taller tires then you'd gain 3". What ever tires you get, measure them since you already know that ATV tires don't always match what's printed on the sidewall.
Offline
Get a Racetech lift kit i installed one on my2012 worked fine did not bind axles.I also put 28" tires on maxxis big horn 2.0 radial on a 3/5 rear wheel with a 2" spacer cleared motor mount fine
Offline
I also used the Racetech lift kit after trying to install the bigger tires unsuccessfully.
what is the best way to get about 3" of more clearance on my 2012 RZR.I have 26" [URL=http://www.discountpartcenter.com/]tires[/URL] on which [URL=http://www.dpccars.com/]cars[/URL] height is 24" would it be a 2-3" lift kit or bigger tires.Bigger tires i am no fan of unless best way,if lift kit what doe,s this involve? THANKS
Offline