You are not logged in.
Has anyone purchased the Polaris Lock and Ride Cab system? I did with the hopes of riding in cold/rainy weather. I started to install it Friday. THERE ARE NO DIRECTIONS with it. I managed to install the roof, windshield, and rear panel without trouble. But the doors are a completely different story. All I recieved in the form of hardware was 2 door hinges. I had to run down to the hardware store and purchase (4) 3/8-13 x 2" bolt to bolt the hinges onto the frame. And then I discovered that I had 2 left side hinges. AAAAAUUUUUHHHHH. I called the dealer who said I have to call Polaris.
Can anyone share there progress with this kit?
Thanks,
Dave
Offline
Wow did I ask the wrong question or post a bad thing?
I did get the dealer to contact Polaris and they will send me a COMPLETE set of hardware with instructions within 1 week. Hopefully it happens.
Dave
Offline
Sorry there has not been anyone to help with this but I dont think to many people have this kit. You may have to be the "expert" on this subject for the next guy... I would like to see some pictures after you get it finished. Good luck!
www.ruthlessmotorsports.com
Shop:801.737.6400
Cell:435.851.3637
Offline
I have installed 2 L&R cabs on 700 XP's one with a glass windshield and the other with the plastic windshield. The instructions from Polaris are not much help but you will need them for the doors. If you don't get them I can try to send you pics or try to answer any questions if I can. The adjustment is the hardest part of the door install but once it's done your good to go.
Offline
Looks from other posts that you have a RZR........if that's the case I can't help, I'm a Ranger Guru......I've yet to see the L&R cab for them. Sorry.
Offline
Thank you for the offer of help. When I get the parts from Polaris and get this thing installed I will post pics.
Dave
Offline