Mudd'n RZR

Cordachine · 2008-06-19 04:46:39

Here is a picture of my RZR with all mods installed...for now...

And a picture of it at work...

The swamp: 2 RZR: 0

MR. KRYPTONITE · 2008-06-19 21:30:35

Very nice RZR! Motor mods?

So when your out swamping or whatever you call it do you just go for it or see how deep it is first? Looks like a ton of fun!!!

Cordachine · 2008-06-20 04:12:53

I will typically creep into the hole to test the waters, or let some other poor sap go through the hole first. If the creep doesn't make it through the hole, back out and try with more power The hole to the right of the one in the picture is actually deep enough to swallow those 30" Mudzilla's!!!

MR. KRYPTONITE · 2008-06-22 11:23:15

Is your snorkle home made or a kit that you bought? Any more pics out muddin?

HellRZR · 2008-06-26 11:39:53

nice rzr...does the HL springs take away alot of the "ride"?...do the 30" zillas rub anything?...would it be possible to fit 31" outlaws with that lift?...or 32" silverbacks?

Cordachine · 2008-06-30 08:55:32

No pics in Mud yet...Went looking for some last week in the UP of MI, but it is as dry as a desert up there right now.

The Snorkel is home made. K&N Apollo filter, 2", 3" PVC and rubber connectors. Not too hard. There is a thread on RZRForums.net for a DIY instructions.

The HL springs do take a little out of the ride. You will notice the ride stiffen up, but they still flex pretty good. I was going through some pretty bumpy stuff last week, and they traveled well.

I have 30x11x14's on all four corners with 1 1/2" wheel spacers. The only rubbing I get is when the front wheels are hard over to either side. They rub on the knuckle where the floor board sticks out a little. I still undecided as to weather I will be betting these knuckles back a little, or will be leaving it. The only times I really noticed it was when I had to turn around in a tight spot.

HellRZR · 2008-06-30 10:09:00

is that the 3" Extreme lift kit?

#1 2008-06-19 04:46:39

Re: Mudd'n RZR

#2 2008-06-19 21:30:35

Re: Mudd'n RZR

#3 2008-06-20 04:12:53

Re: Mudd'n RZR

#4 2008-06-22 11:23:15

Re: Mudd'n RZR

#5 2008-06-26 11:39:53

Re: Mudd'n RZR

#6 2008-06-30 08:55:32

Re: Mudd'n RZR

#7 2008-06-30 10:09:00

Re: Mudd'n RZR

Board footer