You are not logged in.
any one have any pics of a razor with 14 inch itp ss212 machined rims. im going to order rims like maybe friday and them are the rims im going to order with a ITP MUD LITE XTR 28 inch tall. 28x8 on the front and a 28x10 on the back
Offline
I have the same setup- itps, lift, and xtrs, but mine are 27" tires. I don't know if the 28" tires will clear the motor mount on the passenger side. With the 27" tires I had to adjust the shocks to have enough room without touching the motor mount. Now I can put my fingers between the tire and mount. The 27" tires still look very cool.
Offline
this is the place i ordered them from http://www.sidebysidesports.com/porzr3likit.html. it says the front is 3.25 and the back is 2.75
the rims are the 14 inch rim http://www.sidebysidesports.com/itpssalwh142.html
he said the front tires are not as wide as the back
Offline
the rims and tires came in with the 28 and everything was good. 28x8 on the front and 28x12 on the back with out the lift on it
Offline
Hey,
I just got an 09 RZR and just put 27/8/12 ITP 589"s up front and 27/11/12"s on the rear on Motorsport alloy rims with -47 offset. The front tires rub a bit. I was thinking of putting on the 3" lift kit from sidebysidesports.com but have heard that there have been problems of shaft binding and breakage. I see that you have put this kit on. Any problems or mechanical failures?
Thanks
Looney
Offline