You are not logged in.

#1 2010-05-19 21:03:15

ZOCOYOTE
Member
From: MEXICO
Registered: 2010-05-19
Posts: 1

Re: HELP ON A G3 PROGRAMMER, RZR S

I JUST BOUGHT A 2010 RZR S WITH A DFR G3 FUEL PROGRAMMER AND DFR DUAL EXHAUST IN IT AND THE EXHAUST HEADERS TURN RED I MEAN RED ALMOST TO THE MUFFLERS I BEEN DOING SOME QUESTIONS AND THEY SAID ITS LEAN, THE BEST PART IS THAT I DONT HAVE THE MANUAL ON THE G3 PROGRAMER, HOW DO I PUT MORE FUEL IN IT?

THXS IN ADVANCE!!

PAUL.

Offline

#2 2010-05-19 21:31:44

RANGERDALEXP
Member
From: Palmdale, Ca.
Registered: 2008-09-02
Posts: 902

Re: HELP ON A G3 PROGRAMMER, RZR S

Did you get an AF gage installed with this kit? If not we need to do this the hard way, From what you are saying it is not a lean condition but an over rich condition due to unburnt fuel after the exhaust cycle. You need to watch the plugs and make sure that they are not black but brown, a whitish grey would indicate a lean condition. Plugs take several runs to make an accurate determination. It is O.K. to have a slight orange glow on the header pipe under load but not at idle. other then that to do an accurate Air Fuel adjustment at any given load and or R.P.M. an AF gauge should be installed :idea:  :!: .


2003 Ford F350 Superduty FX4 Lariat, Banks Kit.
2003 Rampage 365 Toy Hauler.
2005 Ranger Xp, Sp belt, EPI Clutch Kit, Sp Ecu.
2001 Honda XR650R With Go Fast Kit.
[img]http://i388.photobucket.com/albums/oo330/RANGERDALEXP/JAWBONESNOW11jpg-1.jpg[/img][img]http://i388.photobucket.com/albums/oo330/RANGERDALEXP/aniranger_blue11.gif[/img]
All data and information provided from my postings is for informational purposes only. Rangerdalexp makes no representations as to accuracy, completeness, currentness, suitability, or validity of any information on this site and will not be liable for any errors, omissions, or delays in this information or any losses, injuries, or damages arising from its display or use. All information is provided on an as-is basis used for reference only.

Offline

#3 2010-06-02 22:40:34

elmerkit
Member
Registered: 2010-03-18
Posts: 106

Re: HELP ON A G3 PROGRAMMER, RZR S

It will be very difficult to adjust it, better have a dyno run or try to download the manual will try to find one then post it for you.

Offline

Board footer

Powered by FluxBB