#1 2008-09-27 08:35:17

Ramrod

Member

From: Louisiana

Registered: 2007-08-14

Posts: 23

Re: Installation of H/D springs front end of 07 Polaris Ranger

With the installation of a winch, lock and ride windshield, roof, and cab back, the front end of my Ranger is somewhat squated because of all the extra weight. I purchased a set of heavy duty springs (preloaded to 144 lbs rather than 122 lbs of the standard springs) but they came with no instructions and I have no experience pulling apart the shock/spring assembly.
Any help would be appreciated. I am able to jack up the front end and release the top of the shock from the upper mount; however, I cannot get the spring off the shock strut and I don't think I have the clearance to pull the spring off the top of the shock once the spring retainer is removed (that's something I'm not sure how to do either)  HELP!! 

Bill

RANGERDALEXP

Member

From: Palmdale, Ca.

Registered: 2008-09-02

Posts: 902

Re: Installation of H/D springs front end of 07 Polaris Ranger

look on your other posting, good luck, it is really easy.

---

2003 Ford F350 Superduty FX4 Lariat, Banks Kit.
2003 Rampage 365 Toy Hauler.
2005 Ranger Xp, Sp belt, EPI Clutch Kit, Sp Ecu.
2001 Honda XR650R With Go Fast Kit.
[img]http://i388.photobucket.com/albums/oo330/RANGERDALEXP/JAWBONESNOW11jpg-1.jpg[/img][img]http://i388.photobucket.com/albums/oo330/RANGERDALEXP/aniranger_blue11.gif[/img]
All data and information provided from my postings is for informational purposes only. Rangerdalexp makes no representations as to accuracy, completeness, currentness, suitability, or validity of any information on this site and will not be liable for any errors, omissions, or delays in this information or any losses, injuries, or damages arising from its display or use. All information is provided on an as-is basis used for reference only.