The MAZE Build Up

MR. KRYPTONITE · 2010-11-10 10:55:19

I had to add some additional "stuff" to the RZR for this upcoming Moab trip. Any guesses of what it might be?
Extra parts bin in the back?
You could use some tunes to tune down the screams coming from your machine while your busting it up.

"Extra parts bin" :twisted: Im not that bad am I???

Tunes you ask? They are being made as we speak....

Fasttrax · 2010-11-10 12:02:58

Power steering, turbo and tunes

MR. KRYPTONITE · 2010-11-10 18:58:00

Power steering, turbo and tunes

You did get one of the things right so far.

Like I said once before.... ya go power steering ya never go back!

Badley · 2010-11-10 22:47:24

I knew it would be something I want

Fasttrax · 2010-11-10 23:02:15

different long travel...

I have to think of what else you would do while you was digging in the area :?:

MR. KRYPTONITE · 2010-11-10 23:04:51

I knew it would be something I want

HA! I will let you drive it this weekend. It is amazing at how easy steering is now with those big tires Im running.

MR. KRYPTONITE · 2010-11-10 23:05:32

different long travel...
I have to think of what else you would do while you was digging in the area :?:

Nope. Guess again! lol

Fasttrax · 2010-11-10 23:13:07

different long travel...
I have to think of what else you would do while you was digging in the area :?:
Nope. Guess again! lol

hubs? trying to think of what else is there... I can't sleep now. :shock:

MR. KRYPTONITE · 2010-11-11 22:26:38

different long travel...
I have to think of what else you would do while you was digging in the area :?:
Nope. Guess again! lol
hubs? trying to think of what else is there... I can't sleep now. :shock:

Hubs are still on my wish list.

MR. KRYPTONITE · 2011-02-14 00:35:35

Well its time to get a few more things on the 'ol RZR...

MR. KRYPTONITE · 2011-02-14 00:45:05

This is more of a fix than anything since you can't see it unless your bed is off. 2 trips ago I noticed I was loosing a lot of oil and of course one of those famous polaris plastic parts failed on me.

MR. KRYPTONITE · 2011-02-14 00:52:16

What happens here is once the Polaris OEM plastic breather cover gets hot, it warps and lifts away from the OEM rubber seal in the span between the bolts. Tightening the bolts on the OEM plastic cover only makes the problem worse. Its nice there is a fix.

I replaced the rubber seal while I was at it.

MR. KRYPTONITE · 2011-02-14 00:56:10

Install is very easy but you need to take your bed off which takes a few minutes.

There are a few different brands to choose from. I went with the JJ&A. They are available in raw aluminum, anodized BLUE, anodized RED or anodized ORANGE

Fasttrax · 2011-02-14 08:15:56

The world of plastics!

I would like to take my whole machine apart and replace any moving part or heat related with either nylon or aluminum. What is scary is if it is in a 15k side x side it's in that new 60k truck too.

MR. KRYPTONITE · 2011-02-15 22:03:21

The world of plastics!
I would like to take my whole machine apart and replace any moving part or heat related with either nylon or aluminum. What is scary is if it is in a 15k side x side it's in that new 60k truck too.

The more things that I replace the more things that I find.... it should be built like a tank by now. :shock:

#91 2010-11-10 10:55:19

Re: The MAZE Build Up

#92 2010-11-10 12:02:58

Re: The MAZE Build Up

#93 2010-11-10 18:58:00

Re: The MAZE Build Up

#94 2010-11-10 22:47:24

Re: The MAZE Build Up

#95 2010-11-10 23:02:15

Re: The MAZE Build Up

#96 2010-11-10 23:04:51

Re: The MAZE Build Up

#97 2010-11-10 23:05:32

Re: The MAZE Build Up

#98 2010-11-10 23:13:07

Re: The MAZE Build Up

#99 2010-11-11 22:26:38

Re: The MAZE Build Up

#100 2011-02-14 00:35:35

Re: The MAZE Build Up

#101 2011-02-14 00:45:05

Re: The MAZE Build Up

#102 2011-02-14 00:52:16

Re: The MAZE Build Up

#103 2011-02-14 00:56:10

Re: The MAZE Build Up

#104 2011-02-14 08:15:56

Re: The MAZE Build Up

#105 2011-02-15 22:03:21

Re: The MAZE Build Up

Board footer